Home » Construction » What does S mean in Construction?

S in Construction Meaning

The S meaning in Construction terms is "Square". There are 10 related meanings of the S Construction abbreviation.

S on Construction Full Forms

  1. Square In deck terminology, it is the term for 100 square feet of deck or roofing surface.Formula: number of squares = sum of(length of deck sheet in feet * width of deck sheet in feet * number of pieces)divided by 100. A unit of measure-100 square feet-usually applied to roofing and siding material. Also, a situation that exists when two elements are at right angles to each other. Also a tool for checking this. OR Rectangular, or at a right angle; the tool used for checking rectangularity.
  2. Storage The logistics charge for the costs related to quay rent, charged on both the carrier's equipment or the shipper's equipment for containers staying on the ground idle. For more information see Demurrage, Detention, Per Diem.
  3. Second Sixtieth part of a minute of time.Sixtieth part of a minute of arc
  4. Switch A switch is used to network multiple computers together. Switches made for the consumer market are typically small, flat boxes with 4 to 8 Ethernet ports. These ports can connect to computers, cable or DSL modems, and other switches. High-end switches can have more than 50 ports and often are rack mounted. Switches are more advanced than hubs and less capable than routers.
  5. Without If 70 were bid in the market and there was no offer, the quote would be "70 bid without." The expression "without" indicates a one-way market.
  6. South Alabama, Arkansas, Delaware, District of Columbia, Florida, Georgia, Kentucky, Louisiana, Maryland, Mississippi, North Carolina, Oklahoma, South Carolina, Tennessee, Texas, Virginia, and West Virginia.
  7. Standard A vertical tube in scaffolding. A workstation that can perform tasks without being connected to other resources such as servers or host systems. A document, or an object for physical comparison, for defining product characteristics, products, or processes, prepared by a consensus of a properly constituted group of those substantially affected and having the qualifications to prepare the standard for use.
  8. Sealant A mixture of polymers, fillers, and pigments used to fill and seal joints. Used to prevent the penetration of water or air.
  9. second (do NOT use "sec" for "second;" use "sec" for "secant")
  10. Support The all-important function of keeping the mine workings open. As a verb, it refers to this function; as a noun it refers to all the equipment and materials - timber, roof bolts, concrete, steel, etc that are used to carry out this function.

Frequently Asked Questions (FAQ)

  1. What does S stand for Construction?

    S stands for Without in Construction terms.

  2. What is the shortened form of Second in Construction?

    The short form of "Second" is S for Construction.

Citation

S in Construction. Acronym24.com. (2021, December 15). Retrieved April 13, 2024 from https://acronym24.com/s-meaning-in-construction/

Last updated