Home » Architecture » What does S mean in Architecture?

S in Architecture Meaning

The S meaning in Architecture terms is "Square". There are 11 related meanings of the S Architecture abbreviation.

S on Architecture Full Forms

  1. Square In deck terminology, it is the term for 100 square feet of deck or roofing surface.Formula: number of squares = sum of(length of deck sheet in feet * width of deck sheet in feet * number of pieces)divided by 100. A unit of measure-100 square feet-usually applied to roofing and siding material. Also, a situation that exists when two elements are at right angles to each other. Also a tool for checking this. OR Rectangular, or at a right angle; the tool used for checking rectangularity.
  2. Storage The logistics charge for the costs related to quay rent, charged on both the carrier's equipment or the shipper's equipment for containers staying on the ground idle. For more information see Demurrage, Detention, Per Diem.
  3. Second Sixtieth part of a minute of time.Sixtieth part of a minute of arc
  4. Switch A switch is used to network multiple computers together. Switches made for the consumer market are typically small, flat boxes with 4 to 8 Ethernet ports. These ports can connect to computers, cable or DSL modems, and other switches. High-end switches can have more than 50 ports and often are rack mounted. Switches are more advanced than hubs and less capable than routers.
  5. Sealant A mixture of polymers, fillers, and pigments used to fill and seal joints. Used to prevent the penetration of water or air.
  6. South Alabama, Arkansas, Delaware, District of Columbia, Florida, Georgia, Kentucky, Louisiana, Maryland, Mississippi, North Carolina, Oklahoma, South Carolina, Tennessee, Texas, Virginia, and West Virginia.
  7. Standard A vertical tube in scaffolding. A workstation that can perform tasks without being connected to other resources such as servers or host systems. A document, or an object for physical comparison, for defining product characteristics, products, or processes, prepared by a consensus of a properly constituted group of those substantially affected and having the qualifications to prepare the standard for use.
  8. Security Piece of paper that proves ownership of stocks, bonds and other investments.
  9. Sink Dimples or other distortion in the surface of the part as different areas of the part cool at different rates. These are most commonly caused by excessive material thickness. A depression on the part surface over a thick wall feature i.e., a rib, boss, thick sprue gate or change in wall section. Caused by the delayed cooling effects of the center of the thick area. When the hot center cools, it shrinks and pulls down the skin on the surface.
  10. Step The fitting in which the lower end of a mast is placed To step a mast is to upright it, and ship the heel in the step.
  11. second (do NOT use "sec" for "second;" use "sec" for "secant")

Frequently Asked Questions (FAQ)

  1. What does S stand for Architecture?

    S stands for Security in Architecture terms.

  2. What is the shortened form of Switch in Architecture?

    The short form of "Switch" is S for Architecture.

Citation

S in Architecture. Acronym24.com. (2021, December 15). Retrieved April 24, 2024 from https://acronym24.com/s-meaning-in-architecture/

Last updated